The ANSIMAG KF438 pump has built a strong reputation for high performance and impressive flow from a 4-inch pump. Sundyne’s design engineers built this model to meet a specific need, and the original KF438 featured different magnets and bushings than other members of the ANSIMAG family. Now, the KF438F update brings the popular KF438 pump in line with the other ANSIMAG pumps.
New ANSIMAG Model KF438F Expands Performance Envelope and Simplifies Maintenance
This update:
- Offers interchangeability with other KF pumps
- Requires fewer spares to keep everything up and running
- Features a larger magnetic coupling and motor size capability (up to 100 hp @ 60Hz).
These enhancements increase flow capacity and optimize performance and convenience for KF438F operators.
As part of the Ansimag family, the KF438F also benefits from:
- ETFE (ethylene tetrafluoro ethylene) lining
- Ability to safely manage a wide range of chemicals, including corrosives and solvents up to 250°F
- Enhanced energy-efficiency, with a non-metallic containment shell that generates no eddy currents, thus eliminating heat generation
- Ease of service - with only nine wetted individual parts, allowing onsite service without removing the casing from the piping and with no special tools required.
Simple by Design
With only 9 wetted parts, ANSIMAG pumps are the simplest, most reliable pumps to own, operate and maintain.
Typical Industries:
- Chlor-Alkali
- Isocyanates
- Specialty Chemicals
- Plastics & Polymers
- Polycarbonates
- Pharma & Biotech
- Water & Wastewater
- Battery Manufacturing
- Metal Pickling & Plating
- Agrochemicals
60 Hz Specifications
| Heads to | 290 ft |
| Flows to | 1000 gpm |
| Standards | ANSI / ASME B73.3 (Seamless replacement of B73.1 pumps) |
| Maximum Motor Power | 100hp |
| Temperature Range | -20°F to 250°F |
| Maximum Allowable Working Pressure | 285 psi |
| Hydrotest Pressure | 430 psi |
| Mounting Configuration | Horizontal close coupled, Horizontal long coupled |
| Seal Configurations | Sealless |
| Available Flanges | ANSI/ASME Class 150 RF ANSI/ASME Class 300 RF |
| Solids Range | Up to 20% solids with multigroove shaft |
| Materials of Construction | Carbon Fiber Reinforced ETFE (Impeller parts), ETFE lined ductile iron (casing) |
| Bearing Materials Available | Silicon Carbide, Carbon Graphite Optional |
| Max Viscosity | 900 SSU (200 centistokes) |
| Number of Available Hydraulics | 1 |
To learn more about the new ANSIMAG KF438F, please contact us.
Sundyne World Headquarters
14845 W. 64th Ave. | Arvada, CO 80007 USA | +1 303-425-0800 | www.sundyne.com